- loaded radius
- the distance from the center of tire contact to the wheel center measured in the wheel plane.
Mechanics glossary. 2013.
loaded radius
Look at other dictionaries:
loaded radius — Measurement in inches from the wheel axle centerline to the ground when the tire is properly inflated for the load. Also called static loaded radius … Dictionary of automotive terms
static loaded radius — the loaded radius of a stationary tire inflated to normal recommended pressure. Note: in general, static loaded radius is different from the radius of slowly rolling tire. Static radius of a tire rolled into position may be different from that of … Mechanics glossary
static loaded radius — See loaded radius … Dictionary of automotive terms
radius — See buffered radius crown radius free radius loaded radius radius rods rolling radius scrub radius static loaded radius turning radius unloaded … Dictionary of automotive terms
radius — effective rolling radius flat tire radius loaded radius static loaded radius swing arm radius torque arm radius tread radius … Mechanics glossary
peak-to-peak loaded radial tire run-out — the difference between maximum and minimum values of the loaded radius on a true running wheel … Mechanics glossary
flat tire radius — the distance from the spin axis to the road surface of a loaded tire on a specified rim at zero inflation … Mechanics glossary
radial force variation — the periodic variation of the normal force of a loaded straight free rolling tire which repeats each revolution at a fixed loaded radius, given mean normal force, constant speed, given inflation pressure and test surface curvature … Mechanics glossary
static deflection — the radial difference between the undeflected tire radius and the static loaded radius, under specified loads and inflation … Mechanics glossary
lateral force variation — the periodic variation of lateral force of a straight free rolling tire which repeats each revolution, at a fixed loaded radius, given mean normal force, constant speed, given inflation pressure and test surface curvature … Mechanics glossary
